problem in PIC32 Starter Kit - "SynchMem Periph Sync Failed " (logintosharmi)
PIC32 Starter Kit - "Device reset failed make sure configuration bits are correct" I've got the PIC32 Starter Kit DM320001.I'm running the program file in MPLAB 8.89 The project compiles and works. I...
View ArticlePIC32MZ QFN64 Package - Size of E-Pad (morph1)
Hi Guys, last year i designed a PCB with the new MZ Series and got an engineering Sample to give it a try. The first thing i noticed is that the E-pad is smaller than stated in the datasheet. This...
View ArticleETH MAC loopback example file program fails (Ethernet Starter Kit) (aminos)
Hello, Why the program in ETH MAC loopback example file fails ? the main returns 0 as the example fails. I tried with the ESK conencted and not connected to the computer (with the RJ45 cable). I want...
View ArticlePic32MX and Autobooting (JasonCA)
I have a MPLABX Real Ice and am wondering if there is a way to auto boot for a Pic32MX795F512L? Early on, I started out with the Pic32 USB Start Kit and every time I ran the code on the Pic32 USB Start...
View ArticlePIC32MX430 dma interrupt not working (cluster7)
Hello Forum,I am using PIC32MX430 and I wanted to transmit some data through UART1 using DMA, I have written the below code but interrupt never happens. In interrupt I have set both LED's to go low but...
View ArticleMigating from dsPIC33EP to PIC32MX with Framed SPI and DMA (Vuko)
Hi, I don't know what happened witch my previous thread so I'm writing it again.I'm reading data from ADS1601 in SPI Framed Mode using DMA (2 ping-pong buffers) and then I'm writing data to SD...
View ArticlePIC32 Bootloader AN1388 (sebastien.decorme)
Hi,I try to use the bootloader application from microchip for my 32MX695F512H.my blink led program work fine without the linker.The bootloader program works fine with the application software.When I...
View ArticleRIErr0040: ???? (BDD)
Hi All.I have a board that does not allow me to debug it.I get this errorRIErr0040: The target device is not ready for debugging. Please check your configuration bit settings and program the device...
View ArticleProblem with the RTCC (PIC32MX795F512L) (Pierre Malherbe)
Hello, I am trying to use the RTCC of a PIC32MX795F512L using the code example provided by microchip. To verify that the RTCC works, I make a LED blink every second, with the following code. By getting...
View ArticlePIC32 - debug problem (Markus_AC)
I'm using MPLABX creating and debugging sourcecode for a PIC32MX795F512H.Then and when I get a general exception. My handler is this:void __attribute__((weak, nomips16, noreturn))...
View ArticleSCMxy pins - what they do ? (aminos)
Hello, I want to know what is the function of the pins named SCMxy (like SCM3A, SCM3B, SCM2C etc...) I didn't find an explanation in the datasheet and the IO Ports FRM o_O Thanks in advance...
View ArticlePIC32MX795F512L Flash Memory (Pierre Malherbe)
Hello, I need to use the flash memory of my PIC32MX795F512L to store some data. However, I want to make sure that I wont erase a part of my program by doing so. How can I verify what part of the flash...
View ArticlePIC32MZ REV A3 - SQI operational ? (cwillems)
hello, Does anyone know if the "sqi" module is operational on PIC32MZ REV A3 ?Best regards,cwillems..
View ArticlePIC32MZ availability? (Howard Long)
Folks Has anyone had any luck obtaining any PIC32MZ parts? Clearly the silicon exists, they're on the starter kits and PIM, but I'm after the discrete parts. The marketing on the website announced on...
View ArticleQuestion about UART interrupts in PIC 32 (Pierre Malherbe)
Hello, I am working with the UART code example for the PIC32 and I am obtaining strange results so I just want to make sure the UART interrupt works the way I think it work: If some external...
View ArticleWhat is the correct way to use the structure time of RTCC? PIC32MX...
Hi. I'm trying to use the RTCC of the PIC32MX795F512H to display the system time on a GLCD. I have a function to display characters on the GLCD follows: putcXGLCD(unsigned char x,unsigned char y,...
View ArticlePIC32MX575F512H Wake up from sleep Problem (moveoverover)
Hello there, I'm using a PIC32MX575F512H for an automobile telemetrics system which enters sleep mode when the vehicle engine is turned off. I've made a laboratory test where the CPU goes to sleep...
View ArticlePIC32MZ QFN64 Package - Size of E-Pad (morph1)
Hi Guys, last year i designed a PCB with the new MZ Series and got an engineering Sample to give it a try. The first thing i noticed is that the E-pad is smaller than stated in the datasheet. This...
View ArticleETH MAC loopback example file program fails (Ethernet Starter Kit) (aminos)
Hello, Why the program in ETH MAC loopback example file fails ? the main returns 0 as the example fails. I tried with the ESK conencted and not connected to the computer (with the RJ45 cable). I want...
View ArticlePIC 32 Explorer 16 plus Ethernet Starter KIT (fernando.gatera)
Hey, guys. I had a problem while manipulating the AD Converter of my development kit.The maximum tension I can read is 3.0 V (but it should be 3.3 V) and the maximum digital value is 932 (not 1023).I...
View Article
